 |  |  |  |  |  |
 |  |  |  |  |  |
| 1011 1012 1013 1014 1050 1051 2001 2002A 2004 2004A 2011 2012 2050 244NS-1 3001 3002 3003 3004 3004A 3005 3006 3007 3008 3009 3010 3010E 3011 3012 3015 3016 3017 3019 3020 3021 3022 3023 3050 3052 3054 3055 3065 3066 3100 3101 3103 3113 3114 3151 3154 3156 3157 3158 3159 3161 3167 3197 3198 3199 4001 4002 4003 4004 4005 4006 4007 4012 4014 4015 4052 4054 4055 4056 4111 4115 4150 4153 4199 5001 5002 5003 5004 5005 5006 5011 5012 5014 5015 5016 5017 5018 5050 5113 5153 5199 6011 6012 6052 6053 6150 6151 7001 7004 7005 7006 7007 7307 7413 7490 7821 8001 9001 9003 9004 9005 9006 |
62 Lbs. each
Thickness: 1 ½”
Replaces White & Allis No. 76710290
87 Lbs. each
Thickness: 1 ½”
Replaces White & Allis No. 76710300
98 Lbs. each
Thickness: 2 5/16”
Replaces White & Allis No. 70264161
123 Lbs. each
Thickness: 1 3/8”
Used on Agco & Challenger factory bracket
113 Lbs. each
OD: 25” ID: 13”
Thickness: 1 ½”
3 @ 18 7/8"
165 Lbs. each
OD: 26” ID: 11 ¾”
Thickness: 4”
4 @ 14 ¼”
50 Lbs. each
Holds 12 of #2011
Used on Case tractors
67 Lbs. each
Holds 18 of 2011
Used on Case 7200 & 8900 Series
53 Lbs. each
Holds 9 of #5113
Used on Case tractors
68 Lbs. each
Holds 10 of 5113 or 14 of 3015, 3017
Used on Case tractors
100 Lbs. each
Thickness: 1 5/16”
Used on #2001 & #2002
Factory duplicate
100 Lbs. each
Thickness: 2 1/8”
Used on Case & McCormick factory bracket
500 Lbs. each
OD: 21” ID: 11 5/8”
Thickness: 9 3/8”
4 @ 9 ½” – 11 ½”
150 Lbs. each
Case Uni-loader frame weight
Mounts on 1818 – 1845C in place of fact. weights
40 Lbs. each
Holds 6 of #3019
Used on New Holland
Order pin #3197 if needed
42 Lbs. Each
Hold 7 of #3015 or #3017
Used on New Holland
44 Lbs. each
Holds 10 of #3015 or #3017
Used on New Holland
37 Lbs. each
Holds 6 of 3019
Used on New Holland
Order pin #3197 if needed
74 Lbs. each
Holds 12 of 3019
Used on New Holland TN65V & TN75V
Order pin #3197 if needed
27 Lbs. each
Holds 6 of 3021
Used on New Holland
187 Lbs. each
Holds 10 of #3012 or #3016
Used on New Holland
44 Lbs. each
Holds 10 of #3015 or #3017
Used on New Holland
185 Lbs. each
Holds 10 of 3019
Used on New Holland
Order pin #3197 if needed
31 Lbs. each
Holds 6 of 3021
Used on New Holland
18 Lbs. each
Holds 5 of 3113 or 3022
Front bracket for NH TC18 – TC45 & Case models
D25 – DX5. If used with supersteer axle, 3010E
Bracket extension is required.
27 Lbs. each
Bracket extension for 3010. Required when 3010 is
Used on NH TC18 – TC45 or Case D25 – DX54
With supersteer axle.
32 Lbs. each
Thickness: 3 1/8”
Order hardware separately - Part no. 3198
50 Lbs. each
Thickness: 1 5/8”
Used on #3006 and NH factory bkt.
81 Lbs. each
Thickness: 2”
Used on #3002, #3003 & #3007
Order hardware separately - Part no. 3199
87 Lbs. each
Thickness: 1 ½”
Used on #3006 and NH factory bkt.
99 Lbs. each
Thickness: 2”
Used on #3002, #3003 & #3007
Order hardware separately - Part no. 3199
88 Lbs. each
Thickness: 2 ¼”
Used on #3008, 3001, #3004 & Fact. Bkt.
Order pin #3197 separately if needed.
70 Lbs. each
Thickness: 1”
Used on New Holland
55 Lbs. each
Thickness: 2 ¼”
Used on #3005, #3009 & Factory Bkt.
99 Lbs. each
Thickness: 3 ¼”
Used on NH Boomer Series & #3010
Also used on Case compact tractors
99 Lbs. each
Thickness: ¾” – 1 ¼” (tapered weight)
Used on NH factory bracket found on TL, TS & TM
Series tractors
65 Lbs. each
OD: 17 7/8” ID: 9 7/8”
Thickness:2 3/8”
4 @ 7 7/8”
3 @ 12 3/16”
83 Lbs. each
OD: 22 13/16”
ID: 15 13/16”
Thickness: 1 5/8”
3 @ 15 ½”
100 Lbs. each
OD: 18 3/8” ID: 10 1/8”
Thickness: 2 3/8”
3 @ 10 ¾”
115 Lbs. each
OD: 23 13/16” ID: 11 ¼”
Thickness: 2 ¾”
3 @ 12 ¾”
3 @ 18 7/8”
108 Lbs. each
OD: 19 ¾” ID: 10 ¼”
Thickness: 2 11/16”
3 @ 14”
432 Lbs. each
OD: 28” ID: 16 3/8”
Thickness: 5 ½”
3 @ 15 ½”
31 Lbs. each
Hold 4 of #3113 ( 2 per side )
Used on LS140 & LS150, L265 & LX485
32 Lbs. each
Holds 6 of #3113 ( 3 per side )
Used on LS160 & LS170, L565 – LX665
42 Lbs. each
Holds 8 of #3113 ( 4 per side )
Used on LS180 & LS190, L865 – LX995
50 Lbs. each
Thickness: 3”
Used on NH compacts & Skid Steer Loaders
Order hardware separately - Part no. 3198
49 Lbs. Each
Used on NH Skid Steers Models L553 – L785
75 Lbs. each
OD: 17 ½” ID: 10 1/8”
Thickness: 2 ¾”
3 @ 9 7/8” – 12 ½”
4 @ 9 ¼” – 10 ¼”
66 Lbs. each
OD: 14 7/8” ID: 7 ¾”
Thickness: 3 ½”
3 @ 8 1/8”
4 @ 7 ¼” – 8 ½”
95 Lbs. each
OD: 16 ¾” ID: 7 ¾”
Thickness: 3 ½”
3 @ 8 1/8”
4 @ 7 ¼” – 8 ½”
07 Lbs. each
OD: 18” ID: 9 ¾”
Thickness: 2 ½”
4 @ 9 ½”, 11” & 11 ½”
115 Lbs. each
OD: 20 ¼” ID: 11 ½”
Thickness: 2 3/8”
3 @ 16 ½”
150 Lbs. each
OD: 23” ID: 10 ½”
Thickness: 2”
3 @ 12 ¾”
4 @ 8 ½”
300 Lbs. each
OD: 21 ½” ID: 10 ½”
Thickness: 5 ¼”
3 @ 12 ¾”
80 Lbs. each
OD: 17 ½” ID: 8 ½”
Thickness: 2 7/8”
3 @ 9 ¼” – 12 ½”
4 @ 9 ¼” – 10 ¼”
Attaching hardware for #3019 when used with
#3001, #3004 & factory brackets
Attaching hardware for #3011, #3113 & #3022
when used on NH compact tractors
One bolt kit needed per weight
Attaching hardware for #3015 & #3017 when
used with #3003 & #3007 brackets
One bolt kit needed per weight except when used
With 2011 (use 1 bolt kit per 2 weights)
111 Lbs. each
Hold 8 of #4012 or 10 of #4015
Used on John Deere Utility tractors
123 Lbs. each
Hold 10 of #4012 or 14 of #4015
Used on John Deere
44 Lbs. each
Holds 8 of #4111
Used on John Deere 240 & 250 skid steers
48 Lbs. each
Holds 8 of #4111
Used on John Deere 260 & 270 skid steers
281 Lbs. each
Holds 10 of 4012 or 14 of 4015
Used on JD 5410, 5410N, 5510, 5510N
5420, 5420N, 5520, 5520N
Replaces JD no. AR124753
161 Lbs. each
Holds 14 of 4012 or 20 of 4015
Used on JD 7000 series and larger
Replaces JD no. R82549
Lbs. each
Holds 14 of 4012 or 18 of 4015
Used on JD 6000 & 7000 series
Replaces JD no. L155613 & AR212942
100 Lbs. each
Thickness: 2 ½”
Used on #4001, #4002, #4005 & #4006 bkts.
Replaces JD no. R51680
97 Lbs. each
Thickness: 1 7/16”
Used on #4001, #4002, #4005 & #4006 bkts.
Replaces JD no. R58823
100 Lbs. each
Thickness: 1 7/16”
Used on #4001, #4002, #4005 & #4006 bkts.
Replaces JD no. R127764
142 Lbs. each
OD: 27 ¾” ID: 17 ½”
Thickness: 1 5/8”
3 @ 22 ¼” – 22 ½”
500 Lbs. each
OD: 27 ¾” ID: 17 ½”
Thickness: 5 3/8”
3 @ 22 ¼” – 22 ½”
573 Lbs. each
OD: 25 ¼” ID: 11 ¾”
Thickness: 6”
3 @ 16 ½”
700 Lbs. each
OD: 27 ¾” ID: 17 ½”
Thickness: 7 7/8”
3 @ 22 ¼” – 22 ½”
41 Lbs. each
Thickness: 2 ½”
Used on compact tractors & JD skid steer loaders
70 Lbs. each
Thickness: 2 ½”
Used on compact tractors
70 Lbs. each
OD: 11 ½” ID: 3”
Thickness: 3 ¼”
4 @ 5 ¼” – 6 1/8”
Order hardware separately - Part no. 4199
163 Lbs. each.
OD: 24 ¼” ID: 13 ¼”
Thickness: 3 ¼”
3 @ 14 5/8”
Attaching hardware for #4150
Order one bolt kit for every two weights.
51 Lbs. each
Holds 9 of #5113 or 10 of #3107
Used on Kubota “M” series
22 Lbs. each
Holds 5 of #5011 & #5012
Used on Kubota BX1800 & BX2200
22 Lbs. each
Holds 5 of 5011 or 5012
Used on Kubota L2600 – L4300 & L3010 – L4610
27 Lbs. each
Holds 7 of 5011 or 5012
Used on Kubota L3130 – L5030, MX5000
Replaces Kubota no. MX8068
142 Lbs. each
Holds 12 of 5014
Used on Kubota M-110 & M-120
Replaces Kubota no. M9265
72 Lbs. each
Holds 10 of 5014
Used on Kubota M4800, M4900 & M5700
Replaces Kubota no. M8070
52 Lbs. each
Thickness: 2 1/8”
Used on Kutota B & L
Replaces Kub. No. BL8060
Order hardware separately - Part no. 5199
77 Lbs. each
Thickness: 2 1/8”
Used on Kubota B & L series
Replaces Kub. No. BL8060
Order hardware separately - Part no. 5199
102 Lbs. each
Thickness: 2 7/16”
Used on Kub. Fact. Bkt.
Replaces Kub. No. M8071
Order hardware separately
Attaching hardware for #5014 when used with
Kubota bkt. which holds 8 of M8071
Attaching hardware for #5014 when used with
Kubota bkt. which holds 10 of M8071
Attaching hardware for #5014 when used with
Kubota bkt. which holds 12 of M8071
Attaching hardware for #5113 when used with
5001 bracket used on Kubota M4900 & M5700,
M6800 – M9000
59 Lbs. each
OD: 17 7/8” ID: 8 ½”
Thickness: 1 ½”
3 @ 8 7/8”
98 Lbs. each
Thickness: 1 7/8”
Used on # 2004, #5001& Case Fact. Bkt.
Order hardware separately
45 Lbs. each (4 pc. Set)
OD: 15 ½” ID: 4 ¾”
Thickness: 3 ¼”
4 @ 7 ½”
Attaching hardware for #5011 & #5012 when
used with #5002, #5003, #5004 & Kubota factory
brackets
One bolt kit needed per weight
79 Lbs. each
Thickness: 2”
Used on MF fact. Bkts.
Order hardware separately - Part no. 3199
96 Lbs. each
Thickness: 2”
Used on MF factory bkts.
Order hardware separately - Part no. 3199
148 Lbs. each
OD: 22 ½” ID: 11”
Thickness: 2”
4 @ 12 ¾”
170 Lbs. each
OD: 16 7/8” ID: 8 7/8”
Thickness: 4 ½”
4 @ 8 ½”
125 Lbs. each
OD: 20” ID: 11”
Thickness: 2 ½”
4 @ 11 3/8” & 12 ¾”
146 Lbs. each
OD: 21 ¼” ID: 11 ½”
Thickness: 4”
4 @ 9 ½” – 11 ½”
31 Lbs. each
Holds 7 of #3113
Category I - 3 pt. hitch bracket.
14 Lbs. each
Holds 5 of 5011
Used on Kioti DK35 – DK50
40 Lbs. each
Holds 8 of 3113
Used on ASV RC30 – RC100 Skid Steer
42 Lbs. each
Holds 7 of 5011
Used on Kioti DK65
14 Lbs. each
Holds 5 of 5011
Used on Kioti DK55
11 Lbs. each
Holds 4 of #4111
Used on Cub Cadet
Replaces Cub no. 190307
12 Lbs. each
Holds 4 of #4111
Used on Cub Cadet
Replaces Cub no. 190413
12 Lbs. each
Holds 6 of 4111
Used on Cub Cadet 7264 & 7284
16 Lbs. each
Holds 6 of 4111
Used on Cub Cadet 5234D - 5254
23 Lbs. each
Holds 6 of 4111
Used on Branson tractors
19 Lbs. each
Bobcat axle weight (includes hardware)
20 lbs. each
Holds 4 of 3113 (2 per side)
Universal skid steer bkt.
Mounting hardware included.
40 Lbs. each
Holds 8 of #3113 (4 per side)
Universal skid steer bkt.
Mounting hardware included.
197 Lbs. each
Gehl counter weights – Models 4635 & 4835
Includes mounting hardware
344 Lbs. each
Gehl counter weights – Models 5635 & 6635
Includes mounting hardware
Thickness: 1 ½”
Replaces White & Allis No. 76710290
87 Lbs. each
Thickness: 1 ½”
Replaces White & Allis No. 76710300
98 Lbs. each
Thickness: 2 5/16”
Replaces White & Allis No. 70264161
123 Lbs. each
Thickness: 1 3/8”
Used on Agco & Challenger factory bracket
113 Lbs. each
OD: 25” ID: 13”
Thickness: 1 ½”
3 @ 18 7/8"
165 Lbs. each
OD: 26” ID: 11 ¾”
Thickness: 4”
4 @ 14 ¼”
50 Lbs. each
Holds 12 of #2011
Used on Case tractors
67 Lbs. each
Holds 18 of 2011
Used on Case 7200 & 8900 Series
53 Lbs. each
Holds 9 of #5113
Used on Case tractors
68 Lbs. each
Holds 10 of 5113 or 14 of 3015, 3017
Used on Case tractors
100 Lbs. each
Thickness: 1 5/16”
Used on #2001 & #2002
Factory duplicate
100 Lbs. each
Thickness: 2 1/8”
Used on Case & McCormick factory bracket
500 Lbs. each
OD: 21” ID: 11 5/8”
Thickness: 9 3/8”
4 @ 9 ½” – 11 ½”
150 Lbs. each
Case Uni-loader frame weight
Mounts on 1818 – 1845C in place of fact. weights
40 Lbs. each
Holds 6 of #3019
Used on New Holland
Order pin #3197 if needed
42 Lbs. Each
Hold 7 of #3015 or #3017
Used on New Holland
44 Lbs. each
Holds 10 of #3015 or #3017
Used on New Holland
37 Lbs. each
Holds 6 of 3019
Used on New Holland
Order pin #3197 if needed
74 Lbs. each
Holds 12 of 3019
Used on New Holland TN65V & TN75V
Order pin #3197 if needed
27 Lbs. each
Holds 6 of 3021
Used on New Holland
187 Lbs. each
Holds 10 of #3012 or #3016
Used on New Holland
44 Lbs. each
Holds 10 of #3015 or #3017
Used on New Holland
185 Lbs. each
Holds 10 of 3019
Used on New Holland
Order pin #3197 if needed
31 Lbs. each
Holds 6 of 3021
Used on New Holland
18 Lbs. each
Holds 5 of 3113 or 3022
Front bracket for NH TC18 – TC45 & Case models
D25 – DX5. If used with supersteer axle, 3010E
Bracket extension is required.
27 Lbs. each
Bracket extension for 3010. Required when 3010 is
Used on NH TC18 – TC45 or Case D25 – DX54
With supersteer axle.
32 Lbs. each
Thickness: 3 1/8”
Order hardware separately - Part no. 3198
50 Lbs. each
Thickness: 1 5/8”
Used on #3006 and NH factory bkt.
81 Lbs. each
Thickness: 2”
Used on #3002, #3003 & #3007
Order hardware separately - Part no. 3199
87 Lbs. each
Thickness: 1 ½”
Used on #3006 and NH factory bkt.
99 Lbs. each
Thickness: 2”
Used on #3002, #3003 & #3007
Order hardware separately - Part no. 3199
88 Lbs. each
Thickness: 2 ¼”
Used on #3008, 3001, #3004 & Fact. Bkt.
Order pin #3197 separately if needed.
70 Lbs. each
Thickness: 1”
Used on New Holland
55 Lbs. each
Thickness: 2 ¼”
Used on #3005, #3009 & Factory Bkt.
99 Lbs. each
Thickness: 3 ¼”
Used on NH Boomer Series & #3010
Also used on Case compact tractors
99 Lbs. each
Thickness: ¾” – 1 ¼” (tapered weight)
Used on NH factory bracket found on TL, TS & TM
Series tractors
65 Lbs. each
OD: 17 7/8” ID: 9 7/8”
Thickness:2 3/8”
4 @ 7 7/8”
3 @ 12 3/16”
83 Lbs. each
OD: 22 13/16”
ID: 15 13/16”
Thickness: 1 5/8”
3 @ 15 ½”
100 Lbs. each
OD: 18 3/8” ID: 10 1/8”
Thickness: 2 3/8”
3 @ 10 ¾”
115 Lbs. each
OD: 23 13/16” ID: 11 ¼”
Thickness: 2 ¾”
3 @ 12 ¾”
3 @ 18 7/8”
108 Lbs. each
OD: 19 ¾” ID: 10 ¼”
Thickness: 2 11/16”
3 @ 14”
432 Lbs. each
OD: 28” ID: 16 3/8”
Thickness: 5 ½”
3 @ 15 ½”
31 Lbs. each
Hold 4 of #3113 ( 2 per side )
Used on LS140 & LS150, L265 & LX485
32 Lbs. each
Holds 6 of #3113 ( 3 per side )
Used on LS160 & LS170, L565 – LX665
42 Lbs. each
Holds 8 of #3113 ( 4 per side )
Used on LS180 & LS190, L865 – LX995
50 Lbs. each
Thickness: 3”
Used on NH compacts & Skid Steer Loaders
Order hardware separately - Part no. 3198
49 Lbs. Each
Used on NH Skid Steers Models L553 – L785
75 Lbs. each
OD: 17 ½” ID: 10 1/8”
Thickness: 2 ¾”
3 @ 9 7/8” – 12 ½”
4 @ 9 ¼” – 10 ¼”
66 Lbs. each
OD: 14 7/8” ID: 7 ¾”
Thickness: 3 ½”
3 @ 8 1/8”
4 @ 7 ¼” – 8 ½”
95 Lbs. each
OD: 16 ¾” ID: 7 ¾”
Thickness: 3 ½”
3 @ 8 1/8”
4 @ 7 ¼” – 8 ½”
07 Lbs. each
OD: 18” ID: 9 ¾”
Thickness: 2 ½”
4 @ 9 ½”, 11” & 11 ½”
115 Lbs. each
OD: 20 ¼” ID: 11 ½”
Thickness: 2 3/8”
3 @ 16 ½”
150 Lbs. each
OD: 23” ID: 10 ½”
Thickness: 2”
3 @ 12 ¾”
4 @ 8 ½”
300 Lbs. each
OD: 21 ½” ID: 10 ½”
Thickness: 5 ¼”
3 @ 12 ¾”
80 Lbs. each
OD: 17 ½” ID: 8 ½”
Thickness: 2 7/8”
3 @ 9 ¼” – 12 ½”
4 @ 9 ¼” – 10 ¼”
Attaching hardware for #3019 when used with
#3001, #3004 & factory brackets
Attaching hardware for #3011, #3113 & #3022
when used on NH compact tractors
One bolt kit needed per weight
Attaching hardware for #3015 & #3017 when
used with #3003 & #3007 brackets
One bolt kit needed per weight except when used
With 2011 (use 1 bolt kit per 2 weights)
111 Lbs. each
Hold 8 of #4012 or 10 of #4015
Used on John Deere Utility tractors
123 Lbs. each
Hold 10 of #4012 or 14 of #4015
Used on John Deere
44 Lbs. each
Holds 8 of #4111
Used on John Deere 240 & 250 skid steers
48 Lbs. each
Holds 8 of #4111
Used on John Deere 260 & 270 skid steers
281 Lbs. each
Holds 10 of 4012 or 14 of 4015
Used on JD 5410, 5410N, 5510, 5510N
5420, 5420N, 5520, 5520N
Replaces JD no. AR124753
161 Lbs. each
Holds 14 of 4012 or 20 of 4015
Used on JD 7000 series and larger
Replaces JD no. R82549
Lbs. each
Holds 14 of 4012 or 18 of 4015
Used on JD 6000 & 7000 series
Replaces JD no. L155613 & AR212942
100 Lbs. each
Thickness: 2 ½”
Used on #4001, #4002, #4005 & #4006 bkts.
Replaces JD no. R51680
97 Lbs. each
Thickness: 1 7/16”
Used on #4001, #4002, #4005 & #4006 bkts.
Replaces JD no. R58823
100 Lbs. each
Thickness: 1 7/16”
Used on #4001, #4002, #4005 & #4006 bkts.
Replaces JD no. R127764
142 Lbs. each
OD: 27 ¾” ID: 17 ½”
Thickness: 1 5/8”
3 @ 22 ¼” – 22 ½”
500 Lbs. each
OD: 27 ¾” ID: 17 ½”
Thickness: 5 3/8”
3 @ 22 ¼” – 22 ½”
573 Lbs. each
OD: 25 ¼” ID: 11 ¾”
Thickness: 6”
3 @ 16 ½”
700 Lbs. each
OD: 27 ¾” ID: 17 ½”
Thickness: 7 7/8”
3 @ 22 ¼” – 22 ½”
41 Lbs. each
Thickness: 2 ½”
Used on compact tractors & JD skid steer loaders
70 Lbs. each
Thickness: 2 ½”
Used on compact tractors
70 Lbs. each
OD: 11 ½” ID: 3”
Thickness: 3 ¼”
4 @ 5 ¼” – 6 1/8”
Order hardware separately - Part no. 4199
163 Lbs. each.
OD: 24 ¼” ID: 13 ¼”
Thickness: 3 ¼”
3 @ 14 5/8”
Attaching hardware for #4150
Order one bolt kit for every two weights.
51 Lbs. each
Holds 9 of #5113 or 10 of #3107
Used on Kubota “M” series
22 Lbs. each
Holds 5 of #5011 & #5012
Used on Kubota BX1800 & BX2200
22 Lbs. each
Holds 5 of 5011 or 5012
Used on Kubota L2600 – L4300 & L3010 – L4610
27 Lbs. each
Holds 7 of 5011 or 5012
Used on Kubota L3130 – L5030, MX5000
Replaces Kubota no. MX8068
142 Lbs. each
Holds 12 of 5014
Used on Kubota M-110 & M-120
Replaces Kubota no. M9265
72 Lbs. each
Holds 10 of 5014
Used on Kubota M4800, M4900 & M5700
Replaces Kubota no. M8070
52 Lbs. each
Thickness: 2 1/8”
Used on Kutota B & L
Replaces Kub. No. BL8060
Order hardware separately - Part no. 5199
77 Lbs. each
Thickness: 2 1/8”
Used on Kubota B & L series
Replaces Kub. No. BL8060
Order hardware separately - Part no. 5199
102 Lbs. each
Thickness: 2 7/16”
Used on Kub. Fact. Bkt.
Replaces Kub. No. M8071
Order hardware separately
Attaching hardware for #5014 when used with
Kubota bkt. which holds 8 of M8071
Attaching hardware for #5014 when used with
Kubota bkt. which holds 10 of M8071
Attaching hardware for #5014 when used with
Kubota bkt. which holds 12 of M8071
Attaching hardware for #5113 when used with
5001 bracket used on Kubota M4900 & M5700,
M6800 – M9000
59 Lbs. each
OD: 17 7/8” ID: 8 ½”
Thickness: 1 ½”
3 @ 8 7/8”
98 Lbs. each
Thickness: 1 7/8”
Used on # 2004, #5001& Case Fact. Bkt.
Order hardware separately
45 Lbs. each (4 pc. Set)
OD: 15 ½” ID: 4 ¾”
Thickness: 3 ¼”
4 @ 7 ½”
Attaching hardware for #5011 & #5012 when
used with #5002, #5003, #5004 & Kubota factory
brackets
One bolt kit needed per weight
79 Lbs. each
Thickness: 2”
Used on MF fact. Bkts.
Order hardware separately - Part no. 3199
96 Lbs. each
Thickness: 2”
Used on MF factory bkts.
Order hardware separately - Part no. 3199
148 Lbs. each
OD: 22 ½” ID: 11”
Thickness: 2”
4 @ 12 ¾”
170 Lbs. each
OD: 16 7/8” ID: 8 7/8”
Thickness: 4 ½”
4 @ 8 ½”
125 Lbs. each
OD: 20” ID: 11”
Thickness: 2 ½”
4 @ 11 3/8” & 12 ¾”
146 Lbs. each
OD: 21 ¼” ID: 11 ½”
Thickness: 4”
4 @ 9 ½” – 11 ½”
31 Lbs. each
Holds 7 of #3113
Category I - 3 pt. hitch bracket.
14 Lbs. each
Holds 5 of 5011
Used on Kioti DK35 – DK50
40 Lbs. each
Holds 8 of 3113
Used on ASV RC30 – RC100 Skid Steer
42 Lbs. each
Holds 7 of 5011
Used on Kioti DK65
14 Lbs. each
Holds 5 of 5011
Used on Kioti DK55
11 Lbs. each
Holds 4 of #4111
Used on Cub Cadet
Replaces Cub no. 190307
12 Lbs. each
Holds 4 of #4111
Used on Cub Cadet
Replaces Cub no. 190413
12 Lbs. each
Holds 6 of 4111
Used on Cub Cadet 7264 & 7284
16 Lbs. each
Holds 6 of 4111
Used on Cub Cadet 5234D - 5254
23 Lbs. each
Holds 6 of 4111
Used on Branson tractors
19 Lbs. each
Bobcat axle weight (includes hardware)
20 lbs. each
Holds 4 of 3113 (2 per side)
Universal skid steer bkt.
Mounting hardware included.
40 Lbs. each
Holds 8 of #3113 (4 per side)
Universal skid steer bkt.
Mounting hardware included.
197 Lbs. each
Gehl counter weights – Models 4635 & 4835
Includes mounting hardware
344 Lbs. each
Gehl counter weights – Models 5635 & 6635
Includes mounting hardware
| Ballast Weights for Tractors & Skid Steer loaders. Call 910-652-0101 for assistance & pricing. |
| Reference Information by Tractor Model: We will be adding more reference info soon, call if you need help. Agco-Allis-White Branson Case Challenger Cub Cadet Gehl John Deere Kioti Kubota Mahindra Massey Ferguson McCormick New Holland |